powered by FreeFind
ENGINEERING COMPANY LIMITED
In-line Deflagration Flame Arrester (eccentric design).
See In-Line Deflagration page for more details.
In-line Detonation Flame Arrester.
See In-Line Detonation page for more details.
Endurance Burning Flame Arrester.
See Endurance Burning page for more details.
End-of-line Deflagration Flame Arrester.
Flame Arresters - End-Of-Line, Deflagration
Barton Firtop Engineering Company Limited are the UK & International Agents for the complete range of KITO© flame arresters to ISO 16852 and associated safety devices. KITO© equipment is of European manufacture and is in full compliance with all the latest ATEX and ENrequirements for CE marking.
Main Product Line:
• End-of-line, Deflagration Proof.
• End-of-line - Short & Long Burning Proof.
• In-line flame arrester, Deflagration Proof.
• In-line flame arrester, Detonation Proof.
• Pressure and Vacuum relief valves.
• Vacuum Relief Valve.
• Pressure Vacuum Relief Valve.
• Tank Protection Equipment.
KITO© End-of-line, or Hooded Tank Vent, flame arresters are designed as a breather/venting safety device which incorporates an explosion proof flame arrester for typical installation on top of storage tanks, tank access covers or breather pipes etc.
The breather allows for the unimpeded flow of gases out to atmosphere and clean air into the tank/pipe thereby preventing vacuum locks whilst ensuring provision of a permanent and reliable protection against any flashback into the tank/pipe.
This device is not permitted to be installed in enclosed areas.
This device is suitable for deflagration only, click here for information on endurance burning.
• CE marked to ISO 16852 / EN 12874.
• ATEX Certified.
• Very Competitive Designs.
• Low Pressure Losses.
• Easy Maintenance.
• Competitive Spares.
Download Flame Arrester Technical Data Sheets.
Email our Sales Department for further information by clicking here
or Click Here to send us an On-line Enquiry.
Telephone: +44 (0)1527 831644.